MORE than a supplier
| |
 Time Synchronisation
Why use GPS time synchronisation?
Time synchronisation is a core component to reliable automation, fault analysis and recording in the power industry.
Without accurate timestamps between fault records in individual IED's, it can be extremely difficult to determine the true sequence of events after the fault. Without constant synchronisation, the different IED's internal clocks can lead to microseconds of difference per day.
This is where GPS time synchronisation comes in. Only GPS time synchronsation can give you cheap, easy to manage, reliable, sub-millisecond time synchronisation.
TEKRON offer high quality, reliable GPS time synchronisation solutions,designed and assembled in New Zealand.
They have a proven track record both here, and around the world.
Find out more about time synchronisation (PDF)
TCG 01-E GPS Clock
The Tekron TCG 01-E provides a sub-microsecond time synchronisation
solution with outputs that are electrically isolated. Remote engineering access is provided by Ethernet interface.
The TCG 01-E is designed for synchronsing multiple industrial control and SCADA devices, including protection relays and remote telemetry units.
Options include:
- NTP server output
- PTP precision time protocol
More info on the TCG 01-E
|
|
NTS 01 Network Time Server
The Tekron NTS 01 GPS Network Time Server provides an economic network time synchronisation solution (NTP) with excellent timing accuracy (to within 1 millisecond of UTC). It is designed for synchronsing industrial control and SCADA networks over Ethernet.
More info on the NTS 01
|
|
TTM 01-E GPS Clock
The TekTime TTM 01-E is designed for synchronising industrial control and SCADA equipment, including protection relays and remote telemetry units.
It is an economic time synchronisation solution with excellent timing accuracy (sub-microsecond to UTC).Remote engineering access is provided by Ethernet interface.
Options include:
- NTP server output
- PTP precision time protocol
More info on the TekTime TTM 01-E
|
 |
MOFR Signal Repeater
MOFR are compact DIN-rail-mounted signal repeater units that convert time sync signals from copper or fibre input to copper and fibre output, providing electrical isolation between equipment being synchronised. This allows signals from one time source to be distributed throughout a facility without fear of noise or ground potential rise problems.
More info on MOFR
Download the MOFR 01Application Guide (PDF)
|
|
Go to the Tekron International website
|
|
